| Product / Product Description | Hardner Mixing Ratio | Packing | Thinner Recommended | Thinner Intake | Area of Application |
Drying Time |
|||
| Spray | Brush | Roller | Touch | Hard | |||||
| Penetration Primer Clear | - | Single | Not Required | - | Only brush | - | Inteiro/exterior | 30min | 6hrs |
| WoodCoat Knifing Filler Grey | 10:1 | Two | Thinner for finish | 5% | - | - | For Interior wood only | 30min | 12-16hrs |
| WoodCoat Softcutting Filler White | 4:1 | Two | Thinner for finish | 20-25% | - | - | Interior /Exterior | 30min | 8hrs |
| MetalCoat Glossy/Metallic Finish | 4:1 | Two | Thinner for finish | 15-20% | - | - | Interior/Exterior | 30min | 8hrs |
| MetalCoat Matt Finish Paint | 6:1 | Two | Thinner for finish | 15-20% | - | - | - | - | - |
Clean the existing surface thoroughly with emery paper 36/80/120 to make the surface smooth.
- Apply a coat of Penetration Primer by brush without mixing any thinner.
- Allow it to dry for 6hrs and don't sand the primer.
- Apply WoodCoat knifing filler grey by putty blade if required. Add a few
drops of thinner for finish for application ease. - Allow it to dry for 12-16 hrs and sand the surface with 220 emery paper (dry cutting)
- Applying WoodCoat Soft Cutting Filler white by spray by mixing with thinner for finish.
- Allow it to dry for 8hrs and sand the surface with 320 emery paper to smoothen (dry cutting).
- Apply two coats of MetalCoat Glossy or Matt shades with 8hrs interval between two coats and emery the first coat with 400 emery paper.
[Disclaimer: The manufacturer reserves the right to change the specification without prior notice]