| Product / Product Description | Hardner Mixing Ratio | Packing | Thinner Recommended | Thinner Intake | Area of Application | Drying Time | |||
| Spray | Brush | Roller | Touch | Hard | |||||
| Wood Stains shades | - | Single | - | - | - | - | Interior wood | 10min | - |
- Sand the Wood substrate coated with sealer with suitable emery paper. Remove the loose dust with dry cloth/brush.
- Apply a coat of stainer using muslin cloth pad along the grains.
- The desired shade can be obtained by building up the stainer coat.
- An interval of 5 - 10 mins can be given between the subsequent coats.
- As an alternate, the stainer can be sprayed uniformly on the filled substrate. Excess coating will deepen the shade. If required, the shade can be diluted using Thinner for finish.
- After drying for 30 minutes, the stained substrate can be top coated with any of the following products:
WoodCoat, TreatWood, Melamine, FreshWood & Cento Interior systems.
[Disclaimer: The manufacturer reserves the right to change the specification without prior notice]