Features  |   Shade Range  |   Application Procedure Product / Product Description Hardner Mixing Ratio Packing Thinner Recommended Thinner Intake Area of Application Drying Time Spray Brush Roller Touch Hard MRF WallGarde Sealer White - Single G.P. Thinner - 15-20% 10-15% Interior/Exterior Walls 20 min 4hrs MRF WallGarde Finish Paint - Single G.P. Thinner - 15-20% 10-15% Interior/Exterior Walls 20 min 4hrs

MRF WallGarde can be applied on any painted exterior walls, after sanding the previously coated surface, mildly. For old walls, apply a thin coat of WallGarde Sealer White as a primer coat. For new walls, a coat of white cement to be applied, followed by Wallgarde sealer. Apply one coat of WallGarde either by brush or roller after mixing with the suitable thinner. An additional coat may be required for pastal shades. Between the two coats 4hrs interval has to be given. MRF WallGarde is a two coat paint system. A coat of WallGarde sealer (single pack acrylic primer) For better coverage mix 10% of WallGarde finish paint to WallGarde sealer. Top coat of single pack WallGarde finish paint (based on acrylic resin) Use only the recommended WallGarde stainers to get the desired shade. An additional coat may be required for pastal shades. [Disclaimer: The manufacturer reserves the right to change the specification without prior notice]