Group Profile Company Info Dealer Network Contact Us
    

  1. Identification of Product/Preparation
    Applicable to all MRF PU Paints

  2. Compositional Information on Ingredients
    Acrylic polyol resin and aliphatic polyisocyanate curing agent with solvents and additives.

  3. Hazards Identification
    Flammable. Harmful by inhalation and in contact with skin and eyes. Irritating to skin and eyes.

  4. First-Aid Measures
    In case of eye contact rinse carefully and thoroughly with water and seek medical advice. In case of skin contact wipe off mechanically and wash afflicted areas thoroughly with soap and plenty of water. In case of irritation of the respiratory tract or swallowing, consult a doctor, immmediately.

  5. Fire-Fighting Measures
    Extinguishing media: CO2, Foam, dry powder: in case of larger fires, water spray should be used.

  6. Accidental Release Measures:
    Do not empty into drains. Remove sources of fire, ensure adequate ventilation/exhaust ventilation. Keep unauthorized persons away.Do not keep the lids of the container open.

    Mechanically cover residues with chemical binder or, if necessary, with dry sand and store in closed containers. Further disposal by incineration.

  7. Handling and Storage
    Keep container dry and tightly closed in a cool and well-ventilated place. The precautions required in the handling of solvents must be taken. Ensure adequate ventilation and, if necessary, exhaust ventilation when handling or transferring the product.

    Provide adequate ventilation and, if necessary, air extraction in working areas. Explosion protection required. Do not light matches

  8. Exposure Controls/Personal Protection
    Wear suitable protective clothing for eye/face protection. Protective gloves (of PVC or rubber) are recommended.

    Keep away from foodstuffs, drinks, and tobacco. Wash hands using suitable toilet soaps during breaks and at the end of work. Keep working clothes separate. Change contaminated or soaked clothing.

  9. Physical and Chemical Properties
    Form: Liquid
    Colour: Glossy/Matt/Metallic Shades (Part A)
    Water white(Part B)
    Odour: Smell of Hydrocarbons
    Initial Boiling Point: Approx. 130o C
    Flashpoint: > 27o C
    Viscosity @ 30oC: 30-50 secs Mix(Part A and Part B)
    Solubility in Water: Insoluble as resin
    Solvent Composition: Xylene, and Celloslove Acetate
    Resin Composition: Acrylic (Part A) and Aliphatic Polyisocyanate (Part B)


  10. Stability and Reactivity
    Hazardous decomposition products: No hazardous decomposition products when stored and handled correctly as it is a stable product.

  11. Toxicological Information
    Toxicological tests carried out on another form supplied
    Acute toxicity:
    LD 50 Oral, rat: More than 5000 mg/kg

    Skin and mucous membrane compatibility, rabbit. Skin 24 hours exposure- Slightly irritant
    Eyes - Slightly irritant

    Aromatic Hydrocarbons, such as xylene, irritate the skin and mucous membranes and are narcotic if inhaled in high concentrations.

    While using the usual acceptable occupational hygiene precautions, no adverse effects have been encountered, or are to be expected with products of this class.

  12. Ecological Information
    Do not allow to escape into waters, wastewater or soil.

  13. Disposal Considerations
    Dispose in a Chemical Disposal Area or in a manner that complies with the local, State and Central Regulations.

    May be incinerated in a suitable facility provided local regulations are observed.

    Do not incinerate in closed containers.

  14. Packing Details
    Available in 500 ml, 1 lt, 4 lt and 20 lt packs and are packed in tin and MS Containers.



    Disclaimer
    The data given here is based on current knowledge and experience. The purpose of the Safety Data Sheet is to describe the products in terms of their safety requirements. The data does not signify any warranty with regards to the products' properties.